2536 Municipal Charters
General Development Plan and the 5-Year Capital Improvements Program.
The subdivider will also be advised of any regulatory codes which may
affect his subdivision and what must be accomplished to receive Final
Plat approval.
Section 13-111.1 PROCEDURE
The subdivider shall submit fourteen (14) SIXTEEN (16) copies
of the Sketch Plat accompanied by an application form to the Office of
Planning and Zoning. The Plat shall conform to the requirements in
Section 13-111.2 of these regulations. Within fourteen (14) days of formal
application, a meeting will be held at the Office of Planning and Zoning
with the subdivider and his surveyor or engineer OR HIS DESIGNATED
REPRESENTATIVE, and the Committee to discuss whether the Plat con-
forms with the objectives contained herein and the general health, safety
and welfare of the County. All objections to the Sketch Plat by the
Committee members shall be given to the subdivider at this time. When
the Sketch Plat conforms with the objectives of these regulations, the
Office of Planning and Zoning shall approve or approve with modifications
said Plat within seven (7) days of the meeting. Should the Plat not conform
to the above objectives, the subdivider shall submit an amended Sketch
Plat which indicates conformity with the objectives of these regulations.
Section 13-111.2 REQUIRED INFORMATION
The Sketch Plat shall indicate or be accompanied by:
(1) An application form
(2) Names and addresses of developer, owner, engineer and ad-
joining property owners.
(3) Subdivision name and a listing of street names proposed which,
if approved by the Office of Planning and Zoning, will be reserved for
that subdivision.
(4) Title reference to property and covenant attached thereto.
(5) The Sketch Plat shall be submitted for the entire acreage on
a 1" = 200' scale topographic map and shall indicate the following:
(a) Title, scale and north arrow.
(b) Development data including land characteristics, availability
of utilities, recreation and park area, street systems, lot and block design,
EXISTING OR NATURAL floodplains, and conservation areas, a vicinity
plat AND EXISTING ZONING AND PROPOSED ZONING IF RECLAS-
SIFICATION IS NECESSARY.
(c) A schedule of development.
(D) SUBDIVISION OF TEN (10) LOTS OR LESS MAY BE
SHOWN ON A SMALLER SCALE (IE 1" — 400 IN ADDITION TO
(1" — 2000 AT THE DISCRETION OF THE SUBDIVIDER.
Section 13-112 PRELIMINARY PLAT
(a) The purpose of the Preliminary Plat is to present on a map
or plat the detailed data required by these regulations which will enable
the County to determine whether the proposed layout is satisfactory; that
it fulfills the requirements of the Sketch Plat; and that it will serve the
public interest.
|