Anne Arundel County                             2535

(f)    Upon notification of approval or approval with modifications
of the Sketch Plat from the Office of Planning and Zoning, the subdivider
shall submit a Preliminary Plat WHICH SHALL BE in accordance with
the Sketch Plat and Section 13-112.3 13-112.2 of these regulations.

(g)    The Office of Planning and Zoning will then transmit the Pre-
liminary Plat to the Committee and such other agencies for their approval
and/or recommendations.

(h) The Office of Planning and Zoning will schedule a meeting of
the Committee, the subdivider, and his surveyor or engineer on the Pre-
liminary Plat; said meeting will be within fourteen (14) days of formal
application of the Preliminary Plat unless an extension is requested by
the developer.

(i) Within seven (7) days of the meeting of the Preliminary Plat,
the Office of Planning and Zoning will correspond with the subdivider
confirming the results of the meeting.

(j) Within forty-five (45) days of ACTIVE PROCESSING TIME
BY THE COUNTY GOVERNMENT AFTER formal application of the
Preliminary Plat, the Office of Planning and Zoning will approve, approve
with modifications, or deny preliminary approval of the subdivision.

(k) Upon notification of a preliminary approval, the developer shall
submit a Final Plat for the subdivision; said plat shall be in accordance
with the Preliminary Plat and in accordance with Section 13-113.3 of these
regulations.

(1) The Office of Planning and Zoning will then transmit the Final
Plats to the Committee and such other agencies PUBLIC WORKS DE-
PARTMENT for their approval and/or recommendation AND SEND
COPIES TO THE COMMITTEE AND OTHER AGENCIES FOR THEIR
RECORD.

(m) Within forty-five (45) days of ACTIVE PROCESSING TIME
BY COUNTY GOVERNMENT AFTER formal application of the Final
Plat, the Office of Planning and Zoning shall approve or deny the sub-
division SAID PLAT IF IT IS IN ACCORDANCE WITH THE PRE-
LIMINARY PLAN AND IN COMPLIANCE WITH FINAL PLAT
REQUIREMENTS.

(n) Prior to Final Plat approval, the subdivider may file a Sub-
division Agreement covering his financial obligations for all public con-
struction and other improvements attendant to his subdivision, or follow
the procedures set forth in item (p) below.

(o) Upon notification of Final Plat approval, the subdivider shall
record his subdivision plat in the Office of the Clerk of the Circuit Court.

(p) If the subdivider has not entered into a Public Works Agreement
prior SIMULTANEOUS to recordation, AND HAS FOLLOWED THE
PROCEDURES SET FORTH IN SUBSECTION (n) ABOVE, he shall
prior to any construction enter into such an A PUBLIC WORKS Agreement
for the construction within the subdivision.

(q) The subdivider shall then be entitled to begin development.
Section 13-111 SKETCH PLAT

The purpose of the Sketch Plat is to familiarize the subdivider with
County and State plans which may affect his subdivision such as the